An antilock braking system works with the regular or foundation brakes on your vehicle. ABS simply keeps your base brakes from locking up. In vehicles not equipped with ABS, the driver can manually pump the brakes to prevent wheel lockup. In vehicles equipped with ABS, the driver's foot remains firmly on the brake pedal, allowing the system to
The only major symptom of bad wheel speed sensor in Nissan Titan is the ABS warning light comes on in the instrument cluster, and the anti-lock braking system is disabled. When the ABS light / comes on in your Titan, the anti-lock braking system is disabled. The vehicle can still be braked without ABS.
2. Inspect both front sensor wires for tension due to improper routing (Figures 1 and 2). Make sure that the white clip, attached to sensor cable is properly located on protrusion of the upper control arm (Figure 1). Replace the sensor assembly if needed. 3. Carefully inspect the sensor wire at the sensor head. Look for any cracking or distress.
An anti lock braking system (ABS) sensor is used for determining wheel rotation speed to prevent wheel lock up when braking. The Hall effect ABS sensor consists of a permanent magnet with a Hall effect sensor next to it. The magnetic field strength changes when a magnetism sensitive object passes through the magnetic field of the magnet.
Safely remove the ABS sensor’s lid to disconnect it from the wiring. Then use brake cleaner to clean it (the sensor has connecting wires, and it is like a canister) Set Ohms on your multimeter. Rotate the knob to the Ohms level simply but firmly. The symbol “Ω” stands for the Ohm or resistance.
. 337 1 46 384 416 204 340 222
how to test abs system
